power-agent/powerskills
21 skills
$npx skills add power-agent/powerskillsSkillInstalls
andesProgressive-disclosure workflow for ANDES dynamic studies. Use whenever the user wants to run ANDES through PowerMCP for power flow, small-signal / eigenvalue analysis, or time-domain simulation — evecontingency-mitigationSenior power-engineer playbook for contingency violations. Use whenever N-1 or N-2 studies reveal voltage or thermal problems, binding contingencies, or post-outage islanding — including escalations fconvergence-failure-mitigationSenior power-engineer playbook for power-flow convergence failures. Use whenever a base case or post-change case diverges, oscillates, or fails to solve in PSS/E, PSLF, PowerWorld, pandapower, PyPSA, der-hosting-capacity-mitigationSenior power-engineer playbook for distribution DER integration limits. Use whenever rooftop or utility-scale PV, storage, or other DERs push a feeder into voltage rise, reverse power flow, thermal lidynamic-stability-mitigationSenior power-engineer playbook for dynamic stability problems. Use whenever eigenvalue or time-domain studies show poor damping, transient angle instability, weak voltage recovery, or sustained oscillegretProgressive-disclosure workflow for Egret market and operations optimization. Use whenever the user wants to run DC-OPF, AC-OPF, or unit commitment through PowerMCP — even when they just say "what's tfrequency-response-mitigationSenior power-engineer playbook for frequency-performance problems. Use whenever studies or operations show low system inertia, poor frequency nadir, high RoCoF, weak primary frequency response, UFLS einterconnection-impact-mitigationSenior power-engineer playbook for screening and mitigating the grid impact of a new generator, storage, or large-load interconnection. Use whenever the question is whether X MW can connect at a pointltspiceProgressive-disclosure workflow for LTSpice / PyLTSpice circuit simulation. Use whenever the user wants to create a netlist, run a SPICE transient or AC simulation, inspect traces, or debug LTSpice coopendssProgressive-disclosure workflow for OpenDSS distribution-feeder studies. Use whenever the user wants to compile a DSS model, solve a distribution circuit, inspect feeder bus voltages or power, sweep loperations-planning-mitigationSenior power-engineer playbook for planning and operations optimization problems. Use whenever Egret or PyPSA studies are infeasible, reserve-deficient, congested, too expensive, or heavily curtailed pandapowerProgressive-disclosure workflow for pandapower power-system studies. Use whenever the user wants to load, build, or inspect a pandapower network, run AC power flow, check bus voltages or line and tranpowerworldProgressive-disclosure workflow for PowerWorld Simulator studies through PowerMCP. Use whenever the user wants to open a PowerWorld case, solve the base power flow, inspect flows or voltages, change mpslfProgressive-disclosure workflow for PSLF transmission studies. Use whenever the user wants to open a PSLF case, solve the base power flow, check voltage or overload violations, edit the network (shuntpsseProgressive-disclosure workflow for PSS/E studies through PowerMCP. Use whenever the user wants to open a PSS/E case, solve the base case, discover the right PSSPY command, or run targeted PSS/E autompypsaProgressive-disclosure workflow for PyPSA studies. Use whenever the user wants to load or build a PyPSA network, inspect components or time series, run power flow, solve operational OPF, or run capacishort-circuit-mitigationSenior power-engineer playbook for excessive fault current and breaker over-duty. Use whenever a short-circuit study shows fault duty above interrupting ratings, or a new interconnection raises fault skill-creatorCreate new skills, modify and improve existing skills, and measure skill performance. Use when users want to create a skill from scratch, edit, or optimize an existing skill, run evals to test a skillsurgeUse this skill for transmission power-system studies — AC/DC power flow, DC-OPF / AC-OPF / SCOPF, N-1 / N-2 contingency analysis, PTDF / LODF / OTDF sensitivities, NERC and AC Available Transfer Capabthermal-overload-mitigationSenior power-engineer playbook for overloaded lines and transformers. Use whenever power-flow or contingency studies show loading above ratings — including escalations from a tool skill where branch lvoltage-violation-mitigationSenior power-engineer playbook for voltage violations. Use whenever a base-case or contingency study shows low voltage, high voltage, weak reactive support, or tap exhaustion — including escalations f